Aluminum Stick Facade System With Structural Silicon
When the façade system is observed from the outside, the aluminum profile is not visible and the glassy appearance is completely formed. The joint widths and depths between the windows can be resolved in various sizes depending on the architectural and static requirements. Silicone fill or cable connection spacing and alternatives can be selected in the joint spaces between the two windows. When requested, the wing profile can be applied to place hidden wing mechanisms in the modules.
Classical Capped Curtain Wall System
The aluminum cover profile of the various widths used on the exterior surfaces of the lidded façade system can be applied in many different geometric forms according to the requirements of the architects.
Aluminum Cassette Stick Facade System With Structural Silicon
Structural silicon aluminum cassette stick front system; the windows are bonded to cassettes made of structural silicon and aluminum profiles. The factory-built glazed cassettes allow fast mounting on the ground. With this system it is possible to install from inside the building. The joint width and depth between the two glass windows can be solved in various sizes depending on their architectural and static requirements. Alternatives to silicone sealant or EPDM cord joints can be selected at joint intervals.
Half Lidded Aluminum Stick Facade Systems (Two Sides)
In the façade system, it is possible to obtain various effects by only attempting to cover the profiles horizontally or vertically. Cover profiles with different cross sections and forms can be used according to visual desires. It is also possible to apply the sash in half-closed systems.
Aluminum Panel Facade Systems
The aluminum coating is a constitution with a modular technique of building envelope formed with facade systems. All the components that make up the panel façade modules are put into production in controlled factory environment and assembled on site.
• High quality product
• Quick installation possibility
• Completion of manufacturing under the quality control system in the factory environment.
Double Facade Systems
This is a double-walled solution supporting a building envelope with a second facade. It is possible to create double façade by using different aluminum coated façade systems together. Facade systems and material types to be used can be determined by considering the building concept. Dual façade systems are widely used especially in projects where heat, sound performance should be high. Especially in terms of architecture, the cost of double-facade, which is widely used in Europe, has started to become widespread in Turkey.